Aleratec 280112 Betriebsanweisung PDF herunterladen (Seite 4)

www.aleratec.com

Installing the Hardware

1. RemovetheDVD/CDRoboRacerSAfromthebox.Connectthepower

cordtothemachine.Attachtheappropriatepoweradapterifnecessary(for

280112EUR).Connectthepowercordintoanappropriatepowersource.Place

theRoboRacerSAonalevelsurface.

2. SlidethebinholderintotheslotontheleftsideoftheRoboRacerSAcaseand

placeadiscoutputbinintothebinholder.Therearetwooutputbinsincluded

(50disccapacity,100disccapacity).Makesuretokeeptheoutputbinsthat

comewiththe280112.Althoughsimilartoanormaldiscmediacover,theDisc

OutputBinsareforspecicusewiththeRoboRacerSA.Wheninstalling,make

surethattheangesonthebinaretouchingthelipofthebinholder.Ifthebin

isnotpusheddownasfarasitcango,theedgeofthebincouldinterferewith

thediscoutput.Tousethe100discbin,theDVD/CDRoboRacerSAshouldbe

placedattheedgeofadeskortable.Makesurethatthebindoesnottouchthe

edgeofthedeskortablesurface.

3. Taketheclearplasticdiscguiderodsandplacethemintothe4holesinthe

topoftheunit.Toloadthediscsintotheinputbin,takeonediscandplaceit

horizontallylevelintheinputbin.Nowyoucanloadtherestofthediscs.Allof

thediscsneedtobelevelwiththesidesofthestackstraight.

4. Sametheboxandpackagingmaterialforreturnshipmentshouldyourunit

requireservice.

Note: Choose a Good Location

1. Allow adequate clearance for moving parts.

2. When placing the duplicator on the side/edge of a tabletop ensure

that all four foot pads are in complete contact with the surface of

the table.

3. Do not place near heat sources such as radiators or air ducts, or

in a place subject to direct sunlight, excessive dust, mechanical

vibration or shock.

4. Good care will help assure maximum product life. Improper

operating environment and misuse may void the warranty.

5. Turn the duplicator off and leave unplugged when not in use.

1 2 3 4 5 6 7 8 9 ... 15 16

Keine Kommentare

Aleratec 280112 Betriebsanweisung Seite 4